Failing Water Quality
| Contaminant | Detected Level | EPA MCL | Health Guideline | Status |
|---|---|---|---|---|
| Lead |
18.3
|
15 ppb | 1 ppb | Exceeded |
| Compound | Level | EPA MCL | Health Guideline | Status |
|---|---|---|---|---|
| PFHxS | 11.2 ppt | 10 ppt | 10 ppt | Exceeded |
| PFOA | 9.1 ppt | 4 ppt | 4 ppt | Exceeded |
Water Quality Summary
Tap water quality in Anchorage, Alaska (99508) receives an overall grade of F (Failing) with a score of 13 out of 100, based on analysis of EPA compliance data, contaminant testing, and violation history. This is 41 points below the Alaska state average of 54. Compared to the national average (75), this area scores significantly lower. The area is served by 11 water systems providing water to approximately 225,166 people, using surface water and groundwater sources. Testing has found elevated levels of Lead that warrant attention. Notably, 2 PFAS compounds exceed EPA limits — a significant concern given the persistent nature of these chemicals. Over the past 5 years, water systems here have accumulated 992 violations, including 66 health-based violations.
A score of 13/100 indicates serious water quality failures in Anchorage, AK. The water system has significant violations, contaminant exceedances, or enforcement actions. Residents should strongly consider using a certified water filtration system for drinking and cooking water, requesting their utility's latest test results, and potentially having their water independently tested.
Health Information
Lead is a toxic metal that can leach from aging pipes and plumbing fixtures.
Even low levels of lead exposure can cause developmental delays in children, kidney damage, and cardiovascular effects in adults. The EPA action level is 15 ppb, but health experts recommend no safe level of lead in drinking water.
Lead enters water primarily through corrosion of lead service lines, lead solder, and brass fixtures — especially in homes built before 1986.
If lead is detected above 1 ppb, consider using a certified lead-removal filter (NSF/ANSI 53) for drinking and cooking water. Run cold water for 30 seconds before use if water has been sitting in pipes.
Common Questions
Tap water in Anchorage, Alaska receives a grade of F (Failing) with a score of 13/100. This indicates significant water quality concerns based on violation history, contaminant levels, or enforcement actions. We recommend reviewing the specific contaminants detected below and considering a certified water filter.
ZIP code 99508 is served by 11 water systems using surface water, groundwater sources, providing water to approximately 225,166 people. Multiple source types mean your water may come from a blend of surface and underground sources.
Yes — lead levels in Anchorage, Alaska are 18.3 ppb, which exceeds the EPA action level of 15 ppb. This is a serious concern. We strongly recommend using a certified lead-removal filter for all drinking and cooking water, and having your water independently tested.
Yes — 2 PFAS compounds were detected in water serving Anchorage, Alaska, and 2 exceed EPA maximum contaminant levels. PFAS are persistent chemicals linked to cancer, immune system effects, and developmental issues. A reverse osmosis or activated carbon filter certified for PFAS removal is recommended.
Water systems serving Anchorage, Alaska have received 992 violations in the last 5 years, including 66 health-based violations. Violations can range from paperwork issues (monitoring & reporting) to serious health-based violations where contaminant levels exceeded safe limits. Review the violation details above for specifics.
Based on detected contaminants (lead, PFAS), residents in Anchorage, Alaska should consider: Reverse osmosis (RO) system — most effective for PFAS, lead, and other contaminants. Always look for filters with NSF/ANSI certification for the specific contaminants you want to remove.
Explore Nearby