A
86

US Water Score: A

Salt Lake City, UT 84117

Salt Lake County · Population served: 381,174 · Data updated July 2026

Service-area evidence: EPA service-area records associate the listed system with this ZIP. Boundaries may still overlap or change.

Water Systems Serving This Area

🏔
SALT LAKE CITY WATER SYSTEM
Surface water · Pop. 381,174
PWSID: UTAH18026
🏔
JORDAN VALLEY WCD
Surface water · Pop. 99,335
PWSID: UTAH18027
🌊
MURRAY CITY WATER SYSTEM
Groundwater · Pop. 38,723
PWSID: UTAH18024
🏔
HOLLIDAY WATER COMPANY
Surface water · Pop. 15,000
PWSID: UTAH18010

Contaminants Detected

ContaminantDetected LevelEPA MCLHealth GuidelineStatus
Lead
5.05
15 ppb 1 ppb Warning

PFAS / Forever Chemicals

8 detected 2 above comparison value

UCMR5 occurrence results are screening information, not a finding of regulatory compliance or noncompliance. PFAS rules and compliance dates are evolving.

CompoundLevelEPA MCLHealth GuidelineStatus
PFHxS18.2 ppt10 ppt10 pptAbove comparison value
PFPeA8.9 pptNo standardNo federal MCL shown
PFBS7.5 ppt2000 ppt100 pptBelow comparison value
PFHxA7.1 pptNo standard400 pptNo federal MCL shown
PFOS7.1 ppt4 ppt4 pptAbove comparison value
PFBA6.2 pptNo standard500 pptNo federal MCL shown
PFOA4.0 ppt4 ppt4 pptBelow comparison value
PFHpA3.2 pptNo standardNo federal MCL shown

Violation History (Last 5 Years)

1Total (5yr)
0Health-Based
0Major

Water Quality Summary

Understanding Your Water in Salt Lake City

Tap water quality in Salt Lake City, Utah (84117) receives an overall grade of A (Lower record-based concern) with a score of 86 out of 100, based on analysis of EPA compliance data, contaminant testing, and violation history. This is roughly in line with the Utah state average of 85. Compared to the national average (75), this area performs significantly better. The area is served by 4 water systems providing water to approximately 381,174 people, using surface water and groundwater sources. Testing has found elevated levels of Lead that warrant attention. Notably, 2 PFAS compounds exceed the EPA final MCL value used for comparison — a significant concern given the persistent nature of these chemicals.

Your Score 86/100 A
vs State 1 pts above Utah avg (85)
vs National 11 pts above national avg (75)

What a Grade A Means

A score of 86/100 means public water-system records for Salt Lake City, UT show relatively few concerns in the US Water Score model. This is an internal score, not an EPA safety rating, and it does not guarantee conditions at any specific tap.

Surface water: sourced from rivers, lakes, or reservoirs
Groundwater: drawn from underground aquifers via wells

Health Information

What These Contaminants Mean for You

⚠️

Lead in Your Water

Lead is a toxic metal that can leach from aging pipes and plumbing fixtures.

Health Effects

Even low levels of lead exposure can cause developmental delays in children, kidney damage, and cardiovascular effects in adults. The EPA action level is 15 ppb, but health experts recommend no safe level of lead in drinking water.

Common Sources

Lead enters water primarily through corrosion of lead service lines, lead solder, and brass fixtures — especially in homes built before 1986.

What You Can Do

If lead is detected above 1 ppb, consider using a certified lead-removal filter (NSF/ANSI 53) for drinking and cooking water. Run cold water for 30 seconds before use if water has been sitting in pipes.

Common Questions

Frequently Asked Questions

Based on public water-system records, Salt Lake City, Utah receives an internal US Water Score grade of A (Lower record-based concern) with a score of 86/100. This indicates relatively few system-level concerns in our model, but it is not an EPA safety rating and does not guarantee tap conditions inside individual homes.

ZIP code 84117 is served by 4 water systems using surface water, groundwater sources, providing water to approximately 381,174 people. Multiple source types mean your water may come from a blend of surface and underground sources.

Lead was reported at 5.05 ppb in public-system records for Salt Lake City, Utah. This is below the currently applicable EPA action level of 15 ppb, but may be above more protective health guidance; EPA's future LCRI action level is 10 ppb. Household plumbing can materially change tap-level exposure, so consider certified filtration and individual tap testing, especially where children are present.

Yes — 8 PFAS compounds were detected in records associated with water serving Salt Lake City, Utah, and 2 results exceeded the numerical EPA MCL value used for comparison. UCMR5 occurrence results alone are not a regulatory compliance determination. PFAS rules and compliance timelines are evolving; verify current information with the utility and EPA.

Water systems serving Salt Lake City, Utah have received 1 violation in the last 5 years. Violations can range from paperwork issues (monitoring & reporting) to serious health-based violations where contaminant levels exceeded safe limits. Review the violation details above for specifics.

Based on detected contaminants (lead, PFAS), residents in Salt Lake City, Utah should consider: Reverse osmosis (RO) system — most effective for PFAS, lead, and other contaminants. Always look for filters with NSF/ANSI certification for the specific contaminants you want to remove.

Explore Nearby

Water Quality in Nearby ZIP Codes