A
100

Excellent Water Quality

Flasher, ND 58535

Morton County · Population served: 13,072 · Data updated March 2026

Water Systems Serving This Area

🏔
FLASHER CITY OF
Surface water · Pop. 232
PWSID: ND3000342
🏔
MISSOURI WEST WATER SYSTEM
Surface water · Pop. 4,303
PWSID: ND3001431
🏔
SOUTHWEST WATER AUTHORITY
Surface water · Pop. 8,537
PWSID: ND4501434

Contaminants Detected

ContaminantDetected LevelEPA MCLHealth GuidelineStatus
Lead
0.5
15 ppb 1 ppb Passed

Water Quality Summary

Understanding Your Water in Flasher

Tap water quality in Flasher, North Dakota (58535) receives an overall grade of A (Excellent) with a score of 100 out of 100, based on analysis of EPA compliance data, contaminant testing, and violation history. This is 14 points above the North Dakota state average of 86. Compared to the national average (75), this area performs significantly better. The area is served by 3 water systems providing water to approximately 13,072 people, using surface water sources. The area has a clean violation record over the past 5 years — a positive indicator of consistent water quality management.

Your Score 100/100 A
vs State 14 pts above North Dakota avg (86)
vs National 25 pts above national avg (75)

What a Grade A Means

A score of 100/100 means the water supply in Flasher, ND meets or exceeds all EPA standards with minimal issues. Contaminant levels are well within safe limits, and the water system has maintained a strong compliance record. While no water supply is guaranteed perfect at the tap due to household plumbing, this is among the best-scoring areas in the country.

Surface water: sourced from rivers, lakes, or reservoirs

Health Information

What These Contaminants Mean for You

⚠️

Lead in Your Water

Lead is a toxic metal that can leach from aging pipes and plumbing fixtures.

Health Effects

Even low levels of lead exposure can cause developmental delays in children, kidney damage, and cardiovascular effects in adults. The EPA action level is 15 ppb, but health experts recommend no safe level of lead in drinking water.

Common Sources

Lead enters water primarily through corrosion of lead service lines, lead solder, and brass fixtures — especially in homes built before 1986.

What You Can Do

If lead is detected above 1 ppb, consider using a certified lead-removal filter (NSF/ANSI 53) for drinking and cooking water. Run cold water for 30 seconds before use if water has been sitting in pipes.

Common Questions

Frequently Asked Questions

Based on EPA data, tap water in Flasher, North Dakota receives a grade of A (Excellent) with a score of 100/100. This indicates the water meets federal standards and has relatively few concerns. However, individual homes may still have localized issues such as lead from old plumbing.

ZIP code 58535 is served by 3 water systems using surface water sources, providing water to approximately 13,072 people. Surface water systems are more susceptible to contamination from agricultural runoff, industrial discharge, and weather events, but typically undergo more extensive treatment including filtration and disinfection.

Lead levels in Flasher, North Dakota are 0.5 ppb, which is at or below the health guideline of 1 ppb. This is a positive result, though periodic testing is still recommended.

No PFAS ("forever chemicals") were detected in water systems serving Flasher, North Dakota during the most recent EPA monitoring period (UCMR5). However, not all water systems have been tested for all PFAS compounds, and new contamination can occur over time.

Water systems serving Flasher, North Dakota have zero violations in the last 5 years. This is a positive indicator of consistent regulatory compliance and water quality management.

Water in Flasher, North Dakota shows no major contaminant concerns based on available data. A basic carbon filter can improve taste and reduce chlorine. For extra peace of mind, an NSF-certified pitcher filter or faucet-mount filter provides an affordable layer of protection.

Explore Nearby

Water Quality in Nearby ZIP Codes