B
84

Good Water Quality

Lemmon, SD 57638

Perkins County · Population served: 9,693 · Data updated March 2026

Water Systems Serving This Area

🏔
SOUTHWEST WATER AUTHORITY
Surface water · Pop. 8,537
PWSID: ND4501434
🏔
LEMMON
Surface water · Pop. 1,156
PWSID: SD4600192

Contaminants Detected

ContaminantDetected LevelEPA MCLHealth GuidelineStatus
Lead
1.0
15 ppb 1 ppb Passed

Violation History (Last 5 Years)

3Total (5yr)
0Health-Based
3Major

Water Quality Summary

Understanding Your Water in Lemmon

Tap water quality in Lemmon, South Dakota (57638) receives an overall grade of B (Good) with a score of 84 out of 100, based on analysis of EPA compliance data, contaminant testing, and violation history. This is roughly in line with the South Dakota state average of 84. The area is served by 2 water systems providing water to approximately 9,693 people, using surface water sources.

Your Score 84/100 B
vs State 0 pts above South Dakota avg (84)
vs National 9 pts above national avg (75)

What a Grade B Means

A score of 84/100 means the water in Lemmon, SD is generally good and meets EPA standards, with only minor areas of concern. There may be low levels of detectable contaminants or a small number of non-critical violations. Most residents can feel comfortable with their tap water quality, though basic filtration can provide an extra layer of protection.

Surface water: sourced from rivers, lakes, or reservoirs

Health Information

What These Contaminants Mean for You

⚠️

Lead in Your Water

Lead is a toxic metal that can leach from aging pipes and plumbing fixtures.

Health Effects

Even low levels of lead exposure can cause developmental delays in children, kidney damage, and cardiovascular effects in adults. The EPA action level is 15 ppb, but health experts recommend no safe level of lead in drinking water.

Common Sources

Lead enters water primarily through corrosion of lead service lines, lead solder, and brass fixtures — especially in homes built before 1986.

What You Can Do

If lead is detected above 1 ppb, consider using a certified lead-removal filter (NSF/ANSI 53) for drinking and cooking water. Run cold water for 30 seconds before use if water has been sitting in pipes.

Common Questions

Frequently Asked Questions

Based on EPA data, tap water in Lemmon, South Dakota receives a grade of B (Good) with a score of 84/100. This indicates the water meets federal standards and has relatively few concerns. However, individual homes may still have localized issues such as lead from old plumbing.

ZIP code 57638 is served by 2 water systems using surface water sources, providing water to approximately 9,693 people. Surface water systems are more susceptible to contamination from agricultural runoff, industrial discharge, and weather events, but typically undergo more extensive treatment including filtration and disinfection.

Lead levels in Lemmon, South Dakota are 1.0 ppb, which is at or below the health guideline of 1 ppb. This is a positive result, though periodic testing is still recommended.

No PFAS ("forever chemicals") were detected in water systems serving Lemmon, South Dakota during the most recent EPA monitoring period (UCMR5). However, not all water systems have been tested for all PFAS compounds, and new contamination can occur over time.

Water systems serving Lemmon, South Dakota have received 3 violations in the last 5 years. Violations can range from paperwork issues (monitoring & reporting) to serious health-based violations where contaminant levels exceeded safe limits. Review the violation details above for specifics.

Water in Lemmon, South Dakota shows no major contaminant concerns based on available data. A basic carbon filter can improve taste and reduce chlorine. For extra peace of mind, an NSF-certified pitcher filter or faucet-mount filter provides an affordable layer of protection.

Explore Nearby

Water Quality in Nearby ZIP Codes