B
72

US Water Score: B

Dayton, OH 45409

Montgomery County · Population served: 150,207 · Data updated July 2026

Service-area evidence: EPA service-area records associate the listed system with this ZIP. Boundaries may still overlap or change.

Water Systems Serving This Area

🏔
MONTGOMERY COUNTY WATER SERVICES 1 PWS
Surface water · Pop. 150,207
PWSID: OH5701315
🏔
DAYTON PUBLIC WATER SYSTEM
Surface water · Pop. 141,407
PWSID: OH5703512
🌊
OAKWOOD CITY PWS
Groundwater · Pop. 9,572
PWSID: OH5701915

Contaminants Detected

ContaminantDetected LevelEPA MCLHealth GuidelineStatus
Lead
470.0
15 ppb 1 ppb
Copper
275000.0
1300 ppb 300 ppb

PFAS / Forever Chemicals

5 detected 2 above comparison value

UCMR5 occurrence results are screening information, not a finding of regulatory compliance or noncompliance. PFAS rules and compliance dates are evolving.

CompoundLevelEPA MCLHealth GuidelineStatus
PFHxS10.7 ppt10 ppt10 pptAbove comparison value
PFOS10.0 ppt4 ppt4 pptAbove comparison value
PFBS5.3 ppt2000 ppt100 pptBelow comparison value
PFPeA5.3 pptNo standardNo federal MCL shown
PFHxA5.0 pptNo standard400 pptNo federal MCL shown

Water Quality Summary

Understanding Your Water in Dayton

Tap water quality in Dayton, Ohio (45409) receives an overall grade of B (Moderate-low record-based concern) with a score of 72 out of 100, based on analysis of EPA compliance data, contaminant testing, and violation history. This is 10 points below the Ohio state average of 82. The area is served by 3 water systems providing water to approximately 150,207 people, using surface water and groundwater sources. Notably, 2 PFAS compounds exceed the EPA final MCL value used for comparison — a significant concern given the persistent nature of these chemicals. The area has a clean violation record over the past 5 years — a positive indicator of consistent water quality management.

Your Score 72/100 B
vs State 10 pts below Ohio avg (82)
vs National 3 pts below national avg (75)

What a Grade B Means

A score of 72/100 means Dayton, OH performs well in the US Water Score model, with only minor system-level concerns. Residents should still review their utility's Consumer Confidence Report for official compliance information and household-specific context.

Surface water: sourced from rivers, lakes, or reservoirs
Groundwater: drawn from underground aquifers via wells

Health Information

What These Contaminants Mean for You

⚠️

Lead in Your Water

Lead is a toxic metal that can leach from aging pipes and plumbing fixtures.

Health Effects

Even low levels of lead exposure can cause developmental delays in children, kidney damage, and cardiovascular effects in adults. The EPA action level is 15 ppb, but health experts recommend no safe level of lead in drinking water.

Common Sources

Lead enters water primarily through corrosion of lead service lines, lead solder, and brass fixtures — especially in homes built before 1986.

What You Can Do

If lead is detected above 1 ppb, consider using a certified lead-removal filter (NSF/ANSI 53) for drinking and cooking water. Run cold water for 30 seconds before use if water has been sitting in pipes.

🔶

Copper in Your Water

Copper can leach into water from copper plumbing, especially in newer homes or when water is acidic.

Health Effects

Short-term exposure above 1,300 ppb can cause gastrointestinal distress. Long-term exposure may cause liver or kidney damage. People with Wilson's disease are especially vulnerable.

Common Sources

Copper pipes, fittings, and faucets are the most common source. Corrosive (low-pH) water accelerates copper leaching.

What You Can Do

If copper levels are elevated, flush pipes by running water for 15–30 seconds before use. Reverse osmosis and distillation systems effectively remove copper.

Common Questions

Frequently Asked Questions

Based on public water-system records, Dayton, Ohio receives an internal US Water Score grade of B (Moderate-low record-based concern) with a score of 72/100. This indicates relatively few system-level concerns in our model, but it is not an EPA safety rating and does not guarantee tap conditions inside individual homes.

ZIP code 45409 is served by 3 water systems using surface water, groundwater sources, providing water to approximately 150,207 people. Multiple source types mean your water may come from a blend of surface and underground sources.

Lead levels in the public-system record for Dayton, Ohio are 470.0 ppb, above the currently applicable EPA action level of 15 ppb. EPA's Lead and Copper Rule Improvements lower that action level to 10 ppb when the new requirements take effect. This system-level result does not measure an individual tap; consider a certified lead-removal filter and independent tap testing.

Yes — 5 PFAS compounds were detected in records associated with water serving Dayton, Ohio, and 2 results exceeded the numerical EPA MCL value used for comparison. UCMR5 occurrence results alone are not a regulatory compliance determination. PFAS rules and compliance timelines are evolving; verify current information with the utility and EPA.

Water systems serving Dayton, Ohio have zero violations in the last 5 years. This is a positive indicator of consistent regulatory compliance and water quality management.

Based on detected contaminants (lead, PFAS, copper), residents in Dayton, Ohio should consider: Reverse osmosis (RO) system — most effective for PFAS, lead, and other contaminants. Always look for filters with NSF/ANSI certification for the specific contaminants you want to remove.

Explore Nearby

Water Quality in Nearby ZIP Codes