Failing Water Quality
| Contaminant | Detected Level | EPA MCL | Health Guideline | Status |
|---|---|---|---|---|
| Lead |
14.0
|
15 ppb | 1 ppb | Warning |
| Compound | Level | EPA MCL | Health Guideline | Status |
|---|---|---|---|---|
| PFBA | 9.6 ppt | No standard | 500 ppt | Unregulated |
| PFBA | 6.9 ppt | No standard | 500 ppt | Unregulated |
| PFBS | 6.7 ppt | 2000 ppt | 100 ppt | Below limit |
| PFPeA | 5.4 ppt | No standard | — | Unregulated |
| PFOA | 5.2 ppt | 4 ppt | 4 ppt | Exceeded |
| PFBS | 4.5 ppt | 2000 ppt | 100 ppt | Below limit |
| PFOS | 4.3 ppt | 4 ppt | 4 ppt | Exceeded |
| PFOA | 4.1 ppt | 4 ppt | 4 ppt | Exceeded |
Water Quality Summary
Tap water quality in Punta Gorda, Florida (33982) receives an overall grade of F (Failing) with a score of 21 out of 100, based on analysis of EPA compliance data, contaminant testing, and violation history. This is 42 points below the Florida state average of 63. Compared to the national average (75), this area scores significantly lower. The area is served by 4 water systems providing water to approximately 208,836 people, using surface water and groundwater sources. Testing has found elevated levels of Lead that warrant attention. Notably, 3 PFAS compounds exceed EPA limits — a significant concern given the persistent nature of these chemicals. Over the past 5 years, water systems here have accumulated 56 violations, including 36 health-based violations.
A score of 21/100 indicates serious water quality failures in Punta Gorda, FL. The water system has significant violations, contaminant exceedances, or enforcement actions. Residents should strongly consider using a certified water filtration system for drinking and cooking water, requesting their utility's latest test results, and potentially having their water independently tested.
Health Information
Lead is a toxic metal that can leach from aging pipes and plumbing fixtures.
Even low levels of lead exposure can cause developmental delays in children, kidney damage, and cardiovascular effects in adults. The EPA action level is 15 ppb, but health experts recommend no safe level of lead in drinking water.
Lead enters water primarily through corrosion of lead service lines, lead solder, and brass fixtures — especially in homes built before 1986.
If lead is detected above 1 ppb, consider using a certified lead-removal filter (NSF/ANSI 53) for drinking and cooking water. Run cold water for 30 seconds before use if water has been sitting in pipes.
Common Questions
Tap water in Punta Gorda, Florida receives a grade of F (Failing) with a score of 21/100. This indicates significant water quality concerns based on violation history, contaminant levels, or enforcement actions. We recommend reviewing the specific contaminants detected below and considering a certified water filter.
ZIP code 33982 is served by 4 water systems using surface water, groundwater sources, providing water to approximately 208,836 people. Multiple source types mean your water may come from a blend of surface and underground sources.
Lead was detected at 14.0 ppb in Punta Gorda, Florida. While this is below the EPA action level of 15 ppb, it exceeds the health guideline of 1 ppb recommended by health organizations. Consider a certified lead filter, especially if you have young children.
Yes — 10 PFAS compounds were detected in water serving Punta Gorda, Florida, and 3 exceed EPA maximum contaminant levels. PFAS are persistent chemicals linked to cancer, immune system effects, and developmental issues. A reverse osmosis or activated carbon filter certified for PFAS removal is recommended.
Water systems serving Punta Gorda, Florida have received 56 violations in the last 5 years, including 36 health-based violations. Violations can range from paperwork issues (monitoring & reporting) to serious health-based violations where contaminant levels exceeded safe limits. Review the violation details above for specifics.
Based on detected contaminants (lead, PFAS), residents in Punta Gorda, Florida should consider: Reverse osmosis (RO) system — most effective for PFAS, lead, and other contaminants. Always look for filters with NSF/ANSI certification for the specific contaminants you want to remove.