US Water Score: B
| Contaminant | Detected Level | EPA MCL | Health Guideline | Status |
|---|---|---|---|---|
| Lead |
0.0
|
15 ppb | 1 ppb | Passed |
UCMR5 occurrence results are screening information, not a finding of regulatory compliance or noncompliance. PFAS rules and compliance dates are evolving.
| Compound | Level | EPA MCL | Health Guideline | Status |
|---|---|---|---|---|
| GenX (HFPO-DA) | 95.8 ppt | 10 ppt | 10 ppt | Above comparison value |
| PFPeA | 23.7 ppt | No standard | — | No federal MCL shown |
| PFHxA | 19.3 ppt | No standard | 400 ppt | No federal MCL shown |
| PFBS | 14.3 ppt | 2000 ppt | 100 ppt | Below comparison value |
| PFOS | 8.7 ppt | 4 ppt | 4 ppt | Above comparison value |
| PFOA | 7.5 ppt | 4 ppt | 4 ppt | Above comparison value |
| PFBA | 7.2 ppt | No standard | 500 ppt | No federal MCL shown |
| PFHpA | 3.4 ppt | No standard | — | No federal MCL shown |
Water Quality Summary
Tap water quality in Waterloo, South Carolina (29384) receives an overall grade of B (Moderate-low record-based concern) with a score of 84 out of 100, based on analysis of EPA compliance data, contaminant testing, and violation history. This is roughly in line with the South Carolina state average of 88. The area is served by Laurens County W&S Comm (Sc3020001), a surface water system providing water to approximately 44,866 people. Notably, 3 PFAS compounds exceed the EPA final MCL value used for comparison — a significant concern given the persistent nature of these chemicals. The area has a clean violation record over the past 5 years — a positive indicator of consistent water quality management.
A score of 84/100 means Waterloo, SC performs well in the US Water Score model, with only minor system-level concerns. Residents should still review their utility's Consumer Confidence Report for official compliance information and household-specific context.
Health Information
Lead is a toxic metal that can leach from aging pipes and plumbing fixtures.
Even low levels of lead exposure can cause developmental delays in children, kidney damage, and cardiovascular effects in adults. The EPA action level is 15 ppb, but health experts recommend no safe level of lead in drinking water.
Lead enters water primarily through corrosion of lead service lines, lead solder, and brass fixtures — especially in homes built before 1986.
If lead is detected above 1 ppb, consider using a certified lead-removal filter (NSF/ANSI 53) for drinking and cooking water. Run cold water for 30 seconds before use if water has been sitting in pipes.
Common Questions
Based on public water-system records, Waterloo, South Carolina receives an internal US Water Score grade of B (Moderate-low record-based concern) with a score of 84/100. This indicates relatively few system-level concerns in our model, but it is not an EPA safety rating and does not guarantee tap conditions inside individual homes.
ZIP code 29384 is served by 1 water system using surface water sources, providing water to approximately 44,866 people. Surface water systems are more susceptible to contamination from agricultural runoff, industrial discharge, and weather events, but typically undergo more extensive treatment including filtration and disinfection.
Lead levels in Waterloo, South Carolina are 0.0 ppb, which is at or below the health guideline of 1 ppb. This is a positive result, though periodic testing is still recommended.
Yes — 9 PFAS compounds were detected in records associated with water serving Waterloo, South Carolina, and 3 results exceeded the numerical EPA MCL value used for comparison. UCMR5 occurrence results alone are not a regulatory compliance determination. PFAS rules and compliance timelines are evolving; verify current information with the utility and EPA.
Water systems serving Waterloo, South Carolina have zero violations in the last 5 years. This is a positive indicator of consistent regulatory compliance and water quality management.
Based on detected contaminants (PFAS), residents in Waterloo, South Carolina should consider: Reverse osmosis (RO) system — most effective for PFAS, lead, and other contaminants. Always look for filters with NSF/ANSI certification for the specific contaminants you want to remove.
Explore Nearby