D
46

Poor Water Quality

Angier, NC 27501

Harnett County · Population served: 219,574 · Data updated March 2026

Water Systems Serving This Area

🏔
ANGIER, TOWN OF
Surface water · Pop. 10,317
PWSID: NC0343015
🏔
HARNETT REGIONAL WATER
Surface water · Pop. 116,892
PWSID: NC0343045
🏔
JOHNSTON CO-WEST
Surface water · Pop. 92,365
PWSID: NC0351070

Contaminants Detected

ContaminantDetected LevelEPA MCLHealth GuidelineStatus
Lead
8.5
15 ppb 1 ppb Warning

PFAS / Forever Chemicals

23 detected 6 above EPA limits
CompoundLevelEPA MCLHealth GuidelineStatus
PFBA15.6 pptNo standard500 pptUnregulated
PFOS14.1 ppt4 ppt4 pptExceeded
PFOS13.5 ppt4 ppt4 pptExceeded
PFOS12.3 ppt4 ppt4 pptExceeded
PFPeA9.8 pptNo standardUnregulated
PFHxA9.2 pptNo standard400 pptUnregulated
PFPeA9.2 pptNo standardUnregulated
PFHxA9.1 pptNo standard400 pptUnregulated

Violation History (Last 5 Years)

11Total (5yr)
1Health-Based
6Major

Water Quality Summary

Understanding Your Water in Angier

Tap water quality in Angier, North Carolina (27501) receives an overall grade of D (Poor) with a score of 46 out of 100, based on analysis of EPA compliance data, contaminant testing, and violation history. This is 26 points below the North Carolina state average of 72. Compared to the national average (75), this area scores significantly lower. The area is served by 3 water systems providing water to approximately 219,574 people, using surface water sources. Testing has found elevated levels of Lead that warrant attention. Notably, 6 PFAS compounds exceed EPA limits — a significant concern given the persistent nature of these chemicals. Over the past 5 years, water systems here have accumulated 11 violations, including 1 health-based violations.

Your Score 46/100 D
vs State 26 pts below North Carolina avg (72)
vs National 29 pts below national avg (75)

What a Grade D Means

A score of 46/100 signals poor water quality in Angier, NC. Significant issues have been identified, which may include multiple violations, contaminant levels near or above regulatory limits, or PFAS contamination. We recommend reviewing the detailed contaminant data below, considering a certified water filter, and checking your utility's Consumer Confidence Report for the latest information.

Surface water: sourced from rivers, lakes, or reservoirs

Health Information

What These Contaminants Mean for You

⚠️

Lead in Your Water

Lead is a toxic metal that can leach from aging pipes and plumbing fixtures.

Health Effects

Even low levels of lead exposure can cause developmental delays in children, kidney damage, and cardiovascular effects in adults. The EPA action level is 15 ppb, but health experts recommend no safe level of lead in drinking water.

Common Sources

Lead enters water primarily through corrosion of lead service lines, lead solder, and brass fixtures — especially in homes built before 1986.

What You Can Do

If lead is detected above 1 ppb, consider using a certified lead-removal filter (NSF/ANSI 53) for drinking and cooking water. Run cold water for 30 seconds before use if water has been sitting in pipes.

Common Questions

Frequently Asked Questions

Tap water in Angier, North Carolina receives a grade of D (Poor) with a score of 46/100. This indicates significant water quality concerns based on violation history, contaminant levels, or enforcement actions. We recommend reviewing the specific contaminants detected below and considering a certified water filter.

ZIP code 27501 is served by 3 water systems using surface water sources, providing water to approximately 219,574 people. Surface water systems are more susceptible to contamination from agricultural runoff, industrial discharge, and weather events, but typically undergo more extensive treatment including filtration and disinfection.

Lead was detected at 8.5 ppb in Angier, North Carolina. While this is below the EPA action level of 15 ppb, it exceeds the health guideline of 1 ppb recommended by health organizations. Consider a certified lead filter, especially if you have young children.

Yes — 23 PFAS compounds were detected in water serving Angier, North Carolina, and 6 exceed EPA maximum contaminant levels. PFAS are persistent chemicals linked to cancer, immune system effects, and developmental issues. A reverse osmosis or activated carbon filter certified for PFAS removal is recommended.

Water systems serving Angier, North Carolina have received 11 violations in the last 5 years, including 1 health-based violation. Violations can range from paperwork issues (monitoring & reporting) to serious health-based violations where contaminant levels exceeded safe limits. Review the violation details above for specifics.

Based on detected contaminants (lead, PFAS), residents in Angier, North Carolina should consider: Reverse osmosis (RO) system — most effective for PFAS, lead, and other contaminants. Always look for filters with NSF/ANSI certification for the specific contaminants you want to remove.

Explore Nearby

Water Quality in Nearby ZIP Codes