Fair Water Quality
| Contaminant | Detected Level | EPA MCL | Health Guideline | Status |
|---|---|---|---|---|
| Lead |
0.7
|
15 ppb | 1 ppb | Passed |
Water Quality Summary
Tap water quality in Beaverdale, Pennsylvania (15921) receives an overall grade of C (Fair) with a score of 56 out of 100, based on analysis of EPA compliance data, contaminant testing, and violation history. This is 7 points below the Pennsylvania state average of 63. Compared to the national average (75), this area scores significantly lower. The area is served by Highland S & W Auth Beaverdam, a surface water system providing water to approximately 22,617 people. Over the past 5 years, water systems here have accumulated 58 violations, including 7 health-based violations.
A score of 56/100 indicates fair water quality in Beaverdale, PA. While the water meets minimum federal standards, there are noteworthy concerns — either elevated contaminant levels approaching regulatory limits, a moderate violation history, or both. Residents may want to review specific contaminant data and consider targeted filtration, especially for sensitive groups like children and pregnant women.
Health Information
Lead is a toxic metal that can leach from aging pipes and plumbing fixtures.
Even low levels of lead exposure can cause developmental delays in children, kidney damage, and cardiovascular effects in adults. The EPA action level is 15 ppb, but health experts recommend no safe level of lead in drinking water.
Lead enters water primarily through corrosion of lead service lines, lead solder, and brass fixtures — especially in homes built before 1986.
If lead is detected above 1 ppb, consider using a certified lead-removal filter (NSF/ANSI 53) for drinking and cooking water. Run cold water for 30 seconds before use if water has been sitting in pipes.
Common Questions
Tap water in Beaverdale, Pennsylvania receives a grade of C (Fair) with a score of 56/100. While it generally meets minimum federal standards, there are some areas of concern including violation history or elevated contaminant levels. Sensitive populations (children, pregnant women, elderly) may want to consider additional filtration.
ZIP code 15921 is served by 1 water system using surface water sources, providing water to approximately 22,617 people. Surface water systems are more susceptible to contamination from agricultural runoff, industrial discharge, and weather events, but typically undergo more extensive treatment including filtration and disinfection.
Lead levels in Beaverdale, Pennsylvania are 0.7 ppb, which is at or below the health guideline of 1 ppb. This is a positive result, though periodic testing is still recommended.
No PFAS ("forever chemicals") were detected in water systems serving Beaverdale, Pennsylvania during the most recent EPA monitoring period (UCMR5). However, not all water systems have been tested for all PFAS compounds, and new contamination can occur over time.
Water systems serving Beaverdale, Pennsylvania have received 58 violations in the last 5 years, including 7 health-based violations. Violations can range from paperwork issues (monitoring & reporting) to serious health-based violations where contaminant levels exceeded safe limits. Review the violation details above for specifics.
Water in Beaverdale, Pennsylvania shows no major contaminant concerns based on available data. A basic carbon filter can improve taste and reduce chlorine. For extra peace of mind, an NSF-certified pitcher filter or faucet-mount filter provides an affordable layer of protection.