US Water Score: C
| Contaminant | Detected Level | EPA MCL | Health Guideline | Status |
|---|---|---|---|---|
| Lead |
0.0
|
15 ppb | 1 ppb | Passed |
UCMR5 occurrence results are screening information, not a finding of regulatory compliance or noncompliance. PFAS rules and compliance dates are evolving.
| Compound | Level | EPA MCL | Health Guideline | Status |
|---|---|---|---|---|
| PFOS | 13.9 ppt | 4 ppt | 4 ppt | Above comparison value |
| PFHxS | 10.7 ppt | 10 ppt | 10 ppt | Above comparison value |
| PFOA | 6.1 ppt | 4 ppt | 4 ppt | Above comparison value |
| PFHxA | 5.8 ppt | No standard | 400 ppt | No federal MCL shown |
| PFBA | 5.0 ppt | No standard | 500 ppt | No federal MCL shown |
| PFPeA | 4.8 ppt | No standard | — | No federal MCL shown |
| PFBS | 4.0 ppt | 2000 ppt | 100 ppt | Below comparison value |
Water Quality Summary
Tap water quality in Cheshire, Connecticut (06410) receives an overall grade of C (Mixed record-based signals) with a score of 65 out of 100, based on analysis of EPA compliance data, contaminant testing, and violation history. This is 21 points below the Connecticut state average of 86. The area is served by 2 water systems providing water to approximately 58,441 people, using surface water sources. Notably, 3 PFAS compounds exceed the EPA final MCL value used for comparison — a significant concern given the persistent nature of these chemicals. The area has 55 violations over the past 5 years, though none were classified as health-based.
A score of 65/100 indicates fair performance in the US Water Score model for Cheshire, CT. The records show noteworthy concerns, such as elevated contaminant levels, violation history, or both. Review the detailed contaminant data and official utility reports before making decisions.
Health Information
Lead is a toxic metal that can leach from aging pipes and plumbing fixtures.
Even low levels of lead exposure can cause developmental delays in children, kidney damage, and cardiovascular effects in adults. The EPA action level is 15 ppb, but health experts recommend no safe level of lead in drinking water.
Lead enters water primarily through corrosion of lead service lines, lead solder, and brass fixtures — especially in homes built before 1986.
If lead is detected above 1 ppb, consider using a certified lead-removal filter (NSF/ANSI 53) for drinking and cooking water. Run cold water for 30 seconds before use if water has been sitting in pipes.
Common Questions
Cheshire, Connecticut receives an internal US Water Score grade of C (Fair) with a score of 65/100. Our model found some system-level concerns, such as violation history or elevated contaminant levels. Review your utility's Consumer Confidence Report and consult a qualified professional for household-specific health questions.
ZIP code 06410 is served by 2 water systems using surface water sources, providing water to approximately 58,441 people. Surface water systems are more susceptible to contamination from agricultural runoff, industrial discharge, and weather events, but typically undergo more extensive treatment including filtration and disinfection.
Lead levels in Cheshire, Connecticut are 0.0 ppb, which is at or below the health guideline of 1 ppb. This is a positive result, though periodic testing is still recommended.
Yes — 7 PFAS compounds were detected in records associated with water serving Cheshire, Connecticut, and 3 results exceeded the numerical EPA MCL value used for comparison. UCMR5 occurrence results alone are not a regulatory compliance determination. PFAS rules and compliance timelines are evolving; verify current information with the utility and EPA.
Water systems serving Cheshire, Connecticut have received 55 violations in the last 5 years. Violations can range from paperwork issues (monitoring & reporting) to serious health-based violations where contaminant levels exceeded safe limits. Review the violation details above for specifics.
Based on detected contaminants (PFAS), residents in Cheshire, Connecticut should consider: Reverse osmosis (RO) system — most effective for PFAS, lead, and other contaminants. Always look for filters with NSF/ANSI certification for the specific contaminants you want to remove.